.svg)
Garantía de entrega
Artículo: AMZ-B07VDMGGLH
TR 104P
TR 104 Mold Release High Temperature Paste Wax 14 ounce can
Detalles del producto
Disponibilidad
En stock
En stock
Peso con empaque
1.21 kg
1.21 kg
Devolución
Sí
Sí
Condición
Nuevo
Nuevo
Producto de
Amazon
Amazon
Viaja desde
USA
USA
Sobre este producto
- -An industry standard premium paste resin release agent for use in higher exothermic applications. Formulated using only the highest quality refined carnauba wax, blended with other high temperature synthetic waxes and additives producing the highest quality mold release wax for the composites market. -Great for resin molds, epoxy resin molds. Provides an effective and clean release, compatible with polyester and epoxy molds. As a release agent for composite molding on all FRP tooling, metal and other hard surface molds. -Physical Properties Dry Time: 5-10 minutes@ 72°F. Varies depending on working temperature Wax Melting or Softening Point: 195 - 210°F (88 - 99°C) Penetration Hardness: 1 at 25°C (carnauba wax) Color: light blue tint (color coded for identification) VOC Content: 4.84lbs./gal (580g/l) -Application On new or reconditioned tooling, suggest use of our sealer glaze TR-301 or TR-910 semi-permanent sealer prior to waxing for added release, gloss and mold life. Apply wax with sponge applicator in thin even circular motion to the mold surface. Allow to haze dry (approx. 5-10 min) depending on ambient temperature and polish wipe to gloss finish with soft cloth (do not use microfiber cloth). For new or reconditioned molds, apply a minimum of 6 coats of paste wax, waiting approximately 30-60 minutes between applications for the wax to set & harden after the polish wipe. Best results are obtained, if after application, mold is allowed to stand overnight and a subsequent final coat of wax release applied the following day prior to gel coating. Follow with a coat of wax for the first 2-3 parts released. Then determine how many parts can be effectively produced before re-waxing is required. This will vary depending on molding condition, configuration, resin, mold cycles, effective cure of production gel coat and other factors.
$51,26
44% OFF
$28,48
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
$51,26
44% OFF
$28,48
Hasta 12 meses sin intereses con Diners, Discover y Titanium
Envio incluido
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Conoce más detalles
★ Ease of application and removal. May be allowed to stand at length and still polish wipe easily. ★ Polyester & epoxy resins release agent ★ Polishes to high gloss without streaking. ★ Reduced wax build up and styrene accumulation. ★ Melt Points: 180-2100 F ★ Open mold hand or spray lay up ★Resin Transfer/injection (RTM) & (RIM) ★ Provides hard film with superior heat and chemical properties.
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Tarjetas de Débito y Crédito
Visa
Mastercard
American Express
Dinners
Discover
Alias
Pagos a través de PayPal
Compra procesada en dólares con dinero en cuenta o tarjetas internacionales.
PayPal
